The work environment must be quiet and efficient. The light has a fundamental role: to be normal and preferably, if it is artificial, it is good that it is not neon, never revolt against the eye, must always come from the opposite side of the hand that draws, in doing so avoid areas shadow on the paper.
draw is very important and here we are sitting comfortably at "drawing board" : it must first submit the inclined plane, to allow proper position of the spine and especially, perfectly possible to see the picture we are drawing.
If the plan had not tilted the drawing would appear distorted. Instead, in this way, the sheet is viewed vertically.
DISPLAY OR OVERHEAD:
The display is a "box" with the upper floor consists of a special glass (which does not heat) and within a lamp (usually neon). The main use of this tool is the tracing. CDs. light tables can be purchased in specialty stores (Blueprints), the largest from a A4 size up to a real professional studio tables.
If you dug with the DIY you can build it yourself: However, the careful choice of glass that does not heat up even after a long time, otherwise you risk that all the sheets from curling.
get yourself Before you start drawing a cutting plane, or the rattle of plastic to use the cutter without scratching the table, could also be a piece of plywood or cardboard very often, a whitebait opaque to correct any errors, the tape paper does not tear the paper as transparent tape.
Next to the workbench you must have a shelf on which to hold everything you need to design: illustrations for various types of documents, tools and materials of which you speak in the next few articles in the blog!
0 comments:
Post a Comment